Jablotron JA-162PC, Wireless motion detector with photo camera

30% sale

Product description
Product specifications
Reviews

Product description

JA-162PC, Wireless motion detector with photo camera

This device is a wireless part of the JABLOTRON system. It serves for the detection of human movements in the interior of buildings and visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels.

The camera is equipped with a visible flash to take photos in the dark. The images are stored in the internal memory of the detector and are then transferred to the control panel and from the control panel they can be sent to MyJABLOTRON or ARC. The detector can also take a photo on request.

The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor.

The photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service.

This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models.

Specifications:

Current	2x lithium battery type CR123A 3 V/1.5 Ah
Typical battery life	about 2 years (1 activation and 1 series of photos per day) Please note: batteries are not included
LowBatt voltage	≤2.8V
Quiescent current consumption	90 µA
Maximum power consumption	700mA
Communication frequency	868.1 MHz, JABLOTRON protocol
Maximum radio frequency power (ERP)	11mW
Communication range	approx. 300 m (unrestricted area)
Recommended installation height	2.5 m above the floor
PIR detection angle/detection coverage	90°/12 meters
Horizontal camera shooting angle	90°
Range of the flash	maximum 3 meters
Camera resolution	LQ 320x240; HQ 640 x 480 pixels
Photo format LQ/HQ	5–20 KB/5–64 KB
Typical (LQ) photo transmission time to the control panel	up to 20 s (10 s)
Typical (HQ) photo transmission time to the control panel	up to 130 s (60 s)
Typical time for transferring photos to the server	15 seconds/GPRS; 2 seconds/LAN
Dimensions, weight (without batteries)	150 x 65 x 44 mm, 130 grams
Operational temperature range	-10 °C to +40 °C
Operational environment	In general
Average operational humidity	75% RH, without condensation
Classification	Safety class 2/Environmental class II (EN 50131-1)
Certification Body	Trezor Test No. 3025
Corresponds to	EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000
Can be operated according to	ERC/REC-70-03
Recommended screw	2 x ø 3.5 x 40 mm (countersunk head)