Hikvision DS-KD7003EY-IME2 2-Wire HD outdoor station Aluminum
DS-KD7003EY-IME2 2-Wire HD outdoor station Aluminum
This is a modular intercom unit for two-wire systems. The camera has a 2MP lens (1920x1080 Full HD). The system is easy to scale up by adding a module from the series (bell pushers/buttons or other modules, Mi-Fare EM Readers, etc. These are easy to connect to the basic unit. The Module is equipped with a Mic and Speaker.
This module contains 1 doorbell button and an HD camera with a resolution of 1920 x 1080 px and a viewing angle of 133° horizontally and 82° vertically. The video is compressed with H.264 codec. Sound transmission is provided by a built-in microphone and speaker. The videophone can be connected to the network via Ethernet (1x 10/100Mbps). The videophone can be powered via a 12V DC connection on the terminal block or via a 2-wire power supply, which also serves to supply data to the distribution unit (DS-KAD7060EY). The power consumption is less than 6W. The module is IP65 certified for outdoor use.
The modular solution is a novelty in the intercom range, allowing you to assemble the entire system exactly according to the customer's wishes. Surface-mounted and flush-mounted boxes are available.
Specifications:
System Parameters
- Operating SystemEmbedded Linux operating system
- ROM4GB
- RAM256MB
- CPUEmbedded Processor
Display Parameters
- Screen SizeNA
- Operation MethodNA
- TypeNA
- ResolutionNA
Video Parameters
- Supplement LightLow illumination, IR supplement lights
- Video StandardH.264
- Lens1
- FOVHorizontal: 133°, Vertical: 82°
- WDR
- Support Resolution2MP
Audio Parameters
- Audio Compression StandardG.711 U, G.711 A
Audio Input
- Built-in omnidirectional microphone
- Audio OutputBuilt-in loudspeaker
- Audio Compression Bitrate64 Kbps
- Audio QualityNoise suppression and echo cancellation
- Volume AdjustmentAdjustable
Capacity
- User Capacity 2000
- Linked Indoor Station CapacityMax.99
- Sub Door Station Capacity16
Network Parameters
- Wired Network10/100 Mbps self-adaptive through 2-wire interface
- Wi-FiOnly AP mode for configuration
- BluetoothNA
- 3G/4GNA
Device Interfaces
- Alarm Input2(supports Exit button or Door contact input)
- Network InterfaceNA
- TAMPER1
- Exit Button1
- By Contact Input1
- RS-4852 (RS485 out for Hikvision's sub module communication, RS485 for reservation)
- WiegandNA
- TF CardNA
- Alarm OutputNA
- DIP Switch6 decimal DIP switch
- Lock Control2 (1 relay, max to 30 VDC, 2 A; 1 DC pulse, 20V 4A impulsive, 300 mA holding current, 30 ohm max )
- Power Interface48V,Powered by distributor DS-KAD7060EY or 12VDC
- Two-Wire IP Interface1
General
- Button0-2(Flexible adjustment)
- InstallationSurfacemounting & flush mounting
- Indicator4 LED lights(Opening by? Calling? Intercom? In use)
- WeightWith package: 426g ( 0.94lb),Without package: 290g ( 0.64lb)
- Protective LevelIP65 IK08
Working Temperature
- -40° C to 60° C (-22° F to 140° F)
Working Humidity
- 10% to 90%
Dimensions
- 99.5mm × 98.5mm × 35mm (3.92" × 3.88\" × 1.37\")
Battery
- Power Supply48V,Powered by distributor DS-KAD7060EY or 12VDC
- Application EnvironmentOutdoor
- Power Consumption≤ 6W
- LanguageEnglish, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Spanish, Romanian, Estonian, Croatian, Slovenian, Serbian, Ukrainian, Portuguese