Hikvision DS-PDMCX-E-WE Magnetic contact for outdoor use, IP66

DS-PDMCX-E-WE Magnet Contact for outdoor use, IP66

Hikvision outdoor magnetic contact is intended for mounting outside, on doors or fences and gates.

The Hikvision magnetic contact for outside has the model number DS-PDMCX-E-WE and is a fully secured two-way wireless detector with opening detection, tamper protection, low battery monitoring and connection checking. It can operate for up to 5 years from a built-in battery.

Reach from the Hikvision Hub

The range from the Hub to the Hikvision magnet contact DS-PDMCX-E-WE is 1,600 meters in open field. The connection is continuously monitored by the Hikvision Cloud. If the wireless signal is deliberately disrupted, this will be reported immediately via the Hik-Connect app on your smartphone. The wireless Hikvision signal is called Tri-X and operates on 2 different frequencies in the 868mhz band and has AES-128 encryption.

Register and install

All Hikvision products are easy to connect. Signing up is done with a QR code on each device. Put the Hik-Connect app in the “Enroll” position and you can start adding products by scanning the QR code in the app.

Settings of Hikvision outside magnet contact

In addition to setting the opening detection, you can make a number of other adjustments. For example, you can choose to use the detector as a doorbell function. As soon as someone opens the door, you will hear a bell on your phone. This doorbell function is ideal for retailers, so that you are notified when someone opens your door. You can also indicate when the detector should detect. Only if you switch on the alarm system, or for example permanently.

Battery operated

Like all Hikvision products of the AX Pro alarm system, the detector works on batteries. The normal version of the Hikvision magnetic contact, just like the motion detectors, has the CR123A battery on board, and is therefore completely wireless. All detectors are therefore easy to place anywhere without having to lay cables. The lifespan of the batteries supplied as standard is 5 years with normal use. After this time they are easy to replace with new ones. These batteries are always available from stock. How to replace the batteries can be found in the manual of the magnet contact DS-PDMCX-E-WE .

The magnetic contact is suitable for temperatures between -20 and +60 degrees Celsius. The dimensions are 40.5mm x 146mm x 40.9mm for the sensor and 30.5mm x 146mm x 40.9mm for the magnet and the weight is 247 grams. The whole has an IP66 certification.

Technical specifications:

Detection performance

• Detection Method:Opening Contact
• Detection gapMaximum 76 mm

Function

• Digital ProcessingSupport
• Tamper ProtectionFront; Behind
• Ambient temperature indicator:Support
• Signal Strength IndicatorSupport

Couple

• Alarm input:Normally closed;Normally open;Pulse count
• Enroll On/Off SwitchStartup
• LED IndicatorBlue (Alarm)

Handover

• Transmissiontechnology Tri-X wireless
• Transmission method:Two-way RF wireless
• Transmissionfrequency 868MHz
• Transmissionsecurity AES-128 encryption
• Transmission Range (Free Space)1.6 km
• Frequency HoppingAid
• EnrollmentMethod Startup; remote ID; QR code

Electrical Features:

• Standard Battery life5 years
• Power supplyBattery powered
• Battery TypeCR123A x 1
• Typical Voltage:3V

General

• Operating temperature:-20 °C to 60 °C (-4 °F to 140 °F)
• Storage Temperature-30°C to 60°C (-22°F to 149°F)
• Operation Humidity10% to 90%
• Dimensions (WxHxD)

  Sensor: 40.5mm × 146mm × 40.9mm

  Magnetic Stick: 30.5mm × 146mm × 40.9mm

• 247g
• Application ScenarioOutdoor, IP66