Fire, gas and carbon monoxide detectors

The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in an autonomous Ei208W ...

The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in an autonomous Ei208W or Ei208DW CO detector, allowing the connection of the bus to the JABLOTRON 100 system.

The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the autonomous Ei208W...

The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the autonomous Ei208W or Ei208DW CO detector, allowing the wired connection of the bus to a protection unit or other system. The mod...

The Jablotron JA-110ST BUS combined smoke and heat detector detects fire inside a building. The detector has different s...

The Jablotron JA-110ST BUS combined smoke and heat detector detects fire inside a building. The detector has different settings, such as: smoke and heat, smoke or heat...

The product is used for the detection of fire hazards in the interior of residential and commercial buildings. The detec...

The product is used for the detection of fire hazards in the interior of residential and commercial buildings. The detector is not intended for installation in an industrial environment. The detector is powered from the control panel bus. When the th...

This CO detector can be connected to the Jablotron 100 by means of the JA-150G-CO module. The detector is certified for ...

This CO detector can be connected to the Jablotron 100 by means of the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats.

This CO detector can be connected to the Jablotron 100 by means of the JA-150G-CO module. The detector is certified for ...

This CO detector can be connected to the Jablotron 100 by means of the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats.