Modules

The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the autonomous Ei208W...

The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the autonomous Ei208W or Ei208DW CO detector, allowing the wired connection of the bus to a protection unit or other system. The mod...

The JA-150G-CO is a plug-in module for direct installation in an autonomous CO detector, enabling wireless connection to...

The JA-150G-CO is a plug-in module for direct installation in an autonomous CO detector, enabling wireless connection to the JABLOTRON 100 system.

The Jablotron JA-110T BUS short circuit isolation module is designed to separate and protect unprotected parts of the BU...

The Jablotron JA-110T BUS short circuit isolation module is designed to separate and protect unprotected parts of the BUS wiring. It is powered by the BUS of the control panel.

The Jablotron JB-111N BUS signal output module PG is designed to provide a switchable output delay (8 A) with a NO or NC...

The Jablotron JB-111N BUS signal output module PG is designed to provide a switchable output delay (8 A) with a NO or NC setting. An appropriate PG output...

The product is a system device for the Jablotron Midway Pro and Essex Pro. It provides a switching contact for the outpu...

The product is a system device for the Jablotron Midway Pro and Essex Pro. It provides a switching contact for the output power relay. For example, it can be used to control lighting, fans, etc. The relay communicates via the bus and is powered by the con

Batteries are installed in the Jablotron JA-120N module, which provide the initial current impulse for opening the elect...

Batteries are installed in the Jablotron JA-120N module, which provide the initial current impulse for opening the electric locks. JA-120N can be used wherever it is difficult to use an external power source for the use of elec...

The product is a system device for the Jablotron Midway (Pro) and Essex (Pro) The outputs are isolated from the bus It i...

The product is a system device for the Jablotron Midway (Pro) and Essex (Pro) The outputs are isolated from the bus It is set using the DIP switch The device is not addressable (it does not occupy a position in the security system)

The Jablotron JA-110N-DIN BUS DIN current output power module is designed for a DIN rail. The module supplies power to t...

The Jablotron JA-110N-DIN BUS DIN current output power module is designed for a DIN rail. The module supplies power to the relay output. It can be used, for example, for lighting

The Jablotron JA-151N Wireless signal output module PG is a wireless PG power module (1 A/24 V DC). It copies the status...

The Jablotron JA-151N Wireless signal output module PG is a wireless PG power module (1 A/24 V DC). It copies the status of a selected PG output of the JA-100 system (PG1 to PG32).

The Jablotron JA-190X PSTN communication module provides central station communication and/or voice messages.

The Jablotron JA-150N Wireless power module PG is a wireless PG power module (10 A/230 V AC). It copies the status of a ...

The Jablotron JA-150N Wireless power module PG is a wireless PG power module (10 A/230 V AC). It copies the status of a selected PG output of the JA-100 system (PG1 to PG 32).

The Jablotron JA-118M BUS module for magnetic detectors - 8 inputs is specially designed for connecting magnetic detecto...

The Jablotron JA-118M BUS module for magnetic detectors - 8 inputs is specially designed for connecting magnetic detectors.